Follow the steps below to connect your network:
1. Before you start, please power off your PC, Cable/DSL Modem, and the router.
2. Connect the PC(s) to the LAN Ports of the router, shown as below.
3. Connect the DSL/Cable Modem to the WAN port on the router, shown in figure above.
4. Power on or plug in your modem. Wait for the modem to boot.
5. Connect the AC power adapter to the AC power
socket on the router, and the other end into an electrical outlet. The
router will start to work automatically.
6. Power on your PC.
7. Verify the LED status of your TP-LINK Router;
make sure the PWR LED, WAN LED and the LAN LED (the port that your
computer is connecting to) should be lit, and the SYS LED should be
flashing. If not, please verify if the cable connections are correct and
the CAT5 Ethernet cables work fine.
Related article:
No comments:
Post a Comment
Something Say