Rooting Your 4.2.1 MTK6589

 

Requirements

************

SP Flash Tool

Drivers

TWRP recovery or CWM recovery

Super User.zip

1. Install MTK6589 ADB Drivers and verify in device manager your phone is being recognized

2a. For TWRP (This is the touch screen recovery and recommended), download the TWRP recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file – OR,

2b. For CWM (clockworkmod recovery), download the CWM recovery and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file.

3. Download the LK.BIN UBOOT file and extract it inside the folder of your already extracted SP Flashable ROM. Write over the existing file.

4. Download and copy the superuser zip to the external SD on the phone

5. Download, extract and run MTK6589 SP Flash Tool and load the scatter file from your downloaded ROM

6. Turn Off Phone, pull out the battery for 5 seconds and put it back in

7. Click ‘Upgrade Firmware’ on Flash Tools

8. Plug in Phone – You will see it install the recovery. It should finish with a green circle

9. Unpug your phone from PC.

10. Boot into recovery by holding vol+ and power together

11. Select ‘update from SD’

12. Navigate to the previously copied superuser zip and select it

13. Reboot and verify root

လိုရာဆႏၵ တလုံးတ၀တည္း ျပည့္စုံၾကပါေစ

jsane8119@gmail.com